Run a test pass with video.js 6 and video.js 5.
Also, use in-publish to not run build when running `npm install`.
Consolidate karma configs into one config but keep npm scripts for them.
Add `this.clock.tick(1)` after player creation to support video.js 6.
* Use a starting `bandwidth` value of `0.0625 MB/s` on Android devices
* Do not allow an up-switch in quality until a certain amount of forward buffer has been filled, `BUFFER_LOW_WATER_LINE`
* Dynamically increase the `BUFFER_LOW_WATER_LINE` and `GOAL_BUFFER_LENGTH` from `0 - > 30` and `30 -> 60` respectively during the first 30 seconds of playback
* Abort segment requests before completion if bandwidth reported by the XHR `progress` event shows that network conditions are not fast enough to complete the request without causing rebuffering
* first draft at fixing bandwidth tester and playing around with abr/bandwidth calculations
* More fixes and better per-millisecond resolution for simulation
* More fixes to allow reverting of non-network-simulation files back to their original content
* Added the ability to change bitrates and minor ABR settings
* Added a server that can simulate network conditions based on a network trace file
Added the ability to specify segment sizes for the simulator to simulate a specific video
Changed the simulator to use average bitrates for segment sizes if they are provided
* Add test for qualityLevels from video with source.
* Fix qualityLevels integration where a player is created from a video
with a source.
* Defer setQualityLevels_ until tech is ready.
* Fixed mediaIndex tracking so that it is consistent when the playlist updates during a live stream
* Removed any code in SegmentLoader#handleUpdateEnd_ that changed the mediaIndex
* Reordered SegmentLoader#playlist to make it easier to follow
* All changes to both mediaIndexes (SegmentLoader's and segmentInfo's) now happen in SegmentLoader#playlist
* Added tests for proper mediaIndex tracking with live playlists
- Convert all calls to fillBuffer_ to calls to monitorBuffer_
- Rename monitorBuffer_ to monitorBufferTick_ which becomes the 500ms buffer check timer loop
- Make monitorBuffer_ schedule an immediate timer for monitorBufferTick_
Fixed seeking behavior
Updated getMediaIndexForTime to be simple and stupid
Remove spurious console logs
Fixed an issue with forward seeks and a different problem with backwards seeking (thanks Matt!). Fixed fast rendition change behavior.
Remove limits on gap-skipper. Skip instantly without waiting.
Use the proper native MediaSource duration for buffer removals.
Improvements for live stream rendition changes
Fixed an undefined variable bug
Some more simplification and a very conservative live stream rendition change approach
VOD fixes
Experimental change to the way we throttle the fetcher
Use GOAL_BUFFER_LENGTH again
Continued massive changes to segment fetching. Cleanup and comments.
Fixed a bug where we were fetching starting at mediaIndex 0 on every seek.
Refactor probing code in preparation for pulling into it's own module or class
Moved sync-related logic out of segment-loader and into a new sync-controller class
Removed expired from the SegmentLoader
Update mux.js dependency to 2.5.0
Don't error when the tsprobe returns null
Fixed two issues: MAAT switching and Flash seeking
Rename duration variable
fix flash failing first segment load (#859)
dont use tech for has played (#861)
Code Coverage and Unit tests for Simple Fetcher (#862)
fix has played returning false on vod (#866)
Fixed preload="none" behavior and reduced the incidence of repeating initial segment requests (#878)
Provide option to set contrib-hls first in the HTML5 tech (#889)
This reverts commit 59ddbe1188.
Add playback tests (#894)
Fixed MSE and environment test helpers, restore properly
Removed unused test files
remove expired time tracking and use sync points to calculate seekable (#898)
Fixing a few tests for QUnit 2.0
* Added support for the throughput of the whole system to the ABR algorithm to allow it to adjust better to poor performance especially with flash.
* Added tests for systemBandwidth and throughput
* Replaced instances of (new Date()).getTime() with Date.now()
* Removed redundant test and added a comment to explain bandwidith and throughput setters
* Renamed startOfLoad_ to startOfAppend which is a more accurate name
* Media init segment support
Resolve EXT-X-MAP URI information in the playlist loader. Add support for requesting and appending initialization segments to the segment loader.
* Basic support for fragmented MP4 playback
Re-arrange source updater and track support to fit our design goals more closely. Make adjustments so that the correct source buffer types are created when a fragmented mp4 is encountered. This version will play Apple's fMp4 bipbop stream but you have to seek the player to 10 seconds after starting because the first fragment starts at 10, not 0.
* Finish consolidating audio loaders
Manage a single pair of audio playlist and segment loaders, instead of one per track. Update track logic to work with the new flow.
* Detect and set the correct starting timestamp offset
Probe the init and first MP4 segment to correctly set timestamp offset so that the stream begins at time zero. After this change, Apple's fragmented MP4 HLS example stream plays without additional modification.
* Guard against media playlists without bandwidth information
If a media playlist is loaded directly or bandwidth info is unavailable, make sure the lowest bitrate check doesn't error. Add some unnecessary request shifting to tests to avoid extraneous requests caused by the current behavior of segment loader when abort()-ing THEN pause()-ing.
* Add stub prog_index.m3u8 for tests
Some of the tests point to master playlists that reference prog_index.m3u8. Sinon caught most of the exceptions related to this but the tests weren't really exercising realistic scenarios. Add a stub prog_index to the test fixtures so that requests for prog_index don't unintentionally error.
* Abort init segment XHR alongside other segment XHRs
If the segment loader XHRs are aborted, stop the init segment one as well. Make sure to check the right property for the init segment XHR before continuing the loading process. Make sure falsey values do not cause a playlist to be blacklisted in FF for audio info changes.
* Fix audio track management after reorganization
Delay segment loader initialization steps until all starting configuration is ready. This allowed source updater MIME types to be specified early without triggering the main updater to have its audio disabled on startup. Tweak the mime type identifier function to signal alternate audio earlier. Move `this` references in segment loader's checkBuffer_ out to stateful functions to align with the original design goals. Removed a segment loader test that seemed duplicative after the checkBuffer_ change.
* Fix D3 on stats page
Update URL for D3. Remove audio switcher since it's included by default now.
* Only override codec defaults if an actual value was parsed
When converting codec strings into MIME type configurations for source buffers, make sure to use default values if the codec string didn't supply particular fields. Export the codec to MIME helper function so it can be unit-tested.
* IE fixes
Array.prototype.find() isn't available in IE so use .filter()[0] instead.
* Blacklist unsupported codecs
If MediaSource.isTypeSupported fails in a generic MP4 container, swapping to a variant with those codecs is unlikely to be successful. For instance, the fragmented bip-bop stream includes AC-3 and EC-3 audio which is not supported on Chrome or Firefox today. Exclude variants with codecs that don't pass the isTypeSupported test.
* Fudge segments that are reported as having a zero-second duration
* The fetcher logic basically ignores segments with a duration of zero. Give them a tiny duration so that the fetcher will "see" these segments.
* Added tests for and fixed getSegmentBufferedPercent_ calculations
* Now returns the percent buffered of the entire segment duration instead of the "adjusted" duration
* Handles segments reported as having a zero-duration
* Reduced the number of segments that we will attempt to "timeCorrect" when the segment chosen by `checkBuffer_` is already more than 90% buffered to 1
* No longer trigger errors from `timeCorrection_` handling, returning to the previous behavior
* Use the tech's setCurrentTime function in segment loaders
* Moved getSegmentBufferedPercent to `Ranges` module
* Moved correction for zero-duration segments from parse-stream to parser proper
* Support for multiple alternate audio tracks
* Separated segment loading logic into a reusable piece of functionality so that we can have more than one segment loader and they can manage the segment fetch behavior unique to each playlist they are loading from
* Introduced the MasterPlaylistController to coordinate the loading of the master playlist and separate the behavior of the player from videojs-contrib-hls.js leaving the latter to be the glue between HLS and the video element's events
* Added the SourceUpdater to manage the asynchronous bahavior of SourceBuffers and MediaSource objects so that we can treat it as a non-blocking work queue
* Added parsing for MediaGroups in master playlists
* Added support for AudioTrackList objects and events
* Add support for every HLS mime type possible (#684)
* Flash live fixes (#682)
Garrett Singer